Megger MWA300 and 330A Transformer Winding Analysers are here to offer you a faster, more efficient testing device through combining TTR and resistance testing in a single unit.
This item is not available for sale...
VAX020 expands the IDAX300 test voltage range from 200 V to 2 kV. This improves the capability to perform accurate measurements in extreme high interference environments e.g. HVDC substations.
This item is not...
ICMmonitor is part of the Power Diagnostix ICMseries of digital partial discharge detectors. It is a compact, stand-alone instrument for evaluating the condition of medium and high voltage insulation. A built-in...
The MFT1741+ includes an automatic EV Charge Point RCD test sequence, including the 6 mA dc test*. Test results can be reviewed or saved to memory and reviewed later.
The multifunction TAU3 streamlines transformer testing with a one-time connection for all tests, reducing reliance on multiple instruments and minimising testing time, helping you maximise productivity for fast and...
The patented DualGround™ testing using the DCM module makes the testing safe and time saving by keeping the circuit breaker grounded on both sides throughout the test. The DCM module uses a measuring technology called...
Megger® TDR2000/3, TDR2010 and TDR2050 are state of the art, dual channel, high resolution, compact Time Domain Reflectometers with a colour screen for locating faults on paired metallic cables.
All TDRs in this...
The EZ-RESTORE OVERDRIVE features a 1,100-joule output at 12 kV. A DC output of 12 kV to indicate breakdown voltage is optional with this unit.
This item is not available for online purchase. Please contact 62925161...
The HV DAC series is designed for after-laying testing on newly installed HV-cables as part of quality control, and for condition assessment on repaired or service-aged HV-cables.
Click Here For Video
This item is...
The Megger MLM50 Laser Distance Meter is a compact, simple to use, laser distance measuring device. It is housed in a shock absorbent IP54 rated protective case and incorporates soft-touch, sure-click buttons. With a...
The DET14C and DET24C represent a new generation of earth/ground clamp-on resistance testers. These instruments induce a test current into earth systems and measure ground resistance in multi ground installations...
When a vacuum circuit breaker is commissioned or undergoes routine tests, it is very important to be able to ascertain whether or not the Vacuum Interrupter (VI) is intact before putting it back into operation.
This...
The SFX8-1000 and SFX5-1000 are a mobile, and economical fault locating systems, specially suited for the fault location in low voltage but also in medium voltage systems, for lighting system, pilot cables and for...
The kit for the Megger MCT105 cable locator includes a separate transmitter and receiver. The instrument is designed to help detect and trace cables or metallic conductors in walls or buried underground and can locate...
Offering CAT IV, the MIT1025 is compact, light 10 kV insulation resistance tester for the diagnostic testing and maintenance of high voltage electrical equipment. Enclosed in a tough case it is both smaller and...
The Sverker 650 testing unit, whose design incorporates benefits gleaned from many years of experience in field relay testing, enjoys a well-earned reputation for reliability and convenience.
This item is not...
ICMsystem is part of the Power Diagnostix ICMseries of digital partial discharge detectors. It is usable over a range of frequencies of applied voltage, including power system frequency (50/60 Hz) and VLF (0.1 Hz).
MFT1741 multifunction tester is an instrument designed for testing low voltage electrical installations and especially in locations that suffer from high electrical noise. It provides all the tests required to...
Power through transformer electromechanical tests with the new TTRU1, the latest handheld transformer turns ratiometer from Megger. Perform routine polarity validation and turn ratio tests on power, distribution, and...
TRAX is a multi-functional solution for transformer testing. It also adds several common substation testing functionalities, and ultimately replaces numerous individual testing devices.
This item is not available for...
he PAT300 series will carry out all test requirements automatically with one button press.
This item is not available for online purchase. Please contact 62925161 or sales@cetm.com.sg for purchase/enquiry.
The MTO106 transformer ohmmeter is an easy-to-use, line-operated instrument specifically designed for safe and accurate field measurement of winding resistance in smaller transmission and distribution transformers. It...
The system structure of the City Series offers new and unique capabilities of cable fault location, VLF testing and partial discharge diagnostics.
This item is not available for online purchase. Please contact...
MOM690™ supplements our family of microhmmeters. In addition to high current capacity, MOM690™ features microprocessor-based measurement, storage and reporting. The built-in software enables you to carry out an...
HVB10 is a highly accurate high-voltage bridge designed to locate cable and sheath faults, perform sheath testing, and pinpoint sheath faults, especially suited also for long HV cables.
This item is not available for...
The ADX family includes models designed to perform tests up to 15 kV. The five main options include 4 kV, 6 kV, 12 kV, 15 kV, and 15 kV-A (Armature). These analyzers can be coupled with PPX to increase test voltages...
Offering CAT IV, the MIT525 is compact, light 5 kV insulation resistance tester for the diagnostic testing and maintenance of high voltage electrical equipment. It is both smaller and lighter than its predecessor,...
This powerful test system is designed for primary injection testing of protective relay equipment and circuit breakers.
This item is not available for online purchase. Please contact +65 6292 5161 or sales@cetm.com.sg...
The SPG 5-1000 is a portable multi functional system for cable testing, fault conditioning pre- and pinpoint location of faults in low voltage distribution systems.
This item is not available for online purchase....
S1-568 5 kV insulation resistance testers has been designed, specified and tested to meet the stringent requirements of power utilities in the 21st century. In addition to being tough, high performance insulation...
Portable stand-alone cable fault location unit for LV cable installations.
The SPG5-1000-1 is a comprehensive all-in-one-box fault locating solution, tailored for testing, identifying, converting, prelocating, and...
Megger MVCT test set is a lightweight, robust, portable unit capable of testing both current and voltage transformers.
This item is not available for online purchase. Please contact 62925161 or sales@cetm.com.sg for...
2 wire non-tripping earth loop testers verify the loop impedance of a live electrical circuit, ie without the need to disconnect the electrical supply. The new LTW300 series instruments offer a 2 wire loop testing...
IDAX is an insulation diagnostic instrument based on DFR (Dielectric Frequency Response), also known as FDS (Frequency Domain Spectroscopy). DFR technology is an established test procedure in laboratories that in an...
GISmonitor Portable is for temporary monitoring of partial discharge activity on gas-insulated switchgear.
PD measurements can be easily applied on GIS systems without the need of interrupting the operation. Such...
The Megger EVCA210/EVCA210-UK are compact, simple to use adapters designed to perform all the functions required by the electrical contractor to fully test Mode 3AC Electric Vehicle Charge-points. Specially designed...
MPAC128: Locate gas leaks and partial discharge threats swiftly and precisely with Megger’s MPAC128. Equipped with 128 sensors, this high-resolution acoustic imager enables clear visualisation of gas, pressure, and...
The TM1700 series circuit breaker analysers utilizes some of the ground breaking technology from the top of the line version TM1800. There are four models starting from PC-remote controlled to fully stand-alone. All...
Megger Baker Instruments designs and manufactures electric motor test systems for original equipment manufacturers (OEMs) that help ensure their motors and coils meet or exceed the quality expectations OEMs wish to...
With new developments in cable fault location and pinpointing, SebaKMT is continuously striving to offer customers time-saving and cost-effective solutions.
This item is not available for online purchase. Please...
The system has an impulse transmitter that uses a inductive coupler to inject a signal into the cable.
This item is not available for online purchase. Please contact 62925161 or sales@cetm.com.sg for purchase/enquiry
The SMART THUMP ST25-30 Portable Cable Fault Locating System provides safe, efficient and extremely easy-to-use solutions for quickly identifying, prelocating and pinpointing various types of cable faults for power...
MOM200A is ideal for finding poor connections since it can put out 100 A for extended periods. Its range extending up to 20 milliohms makes it ideal for measuring many different types of connections.
This item is...
A timer is often needed for use with the CSU600A current supply unit or ODEN A primary current injection test system. Testing relays with SVERKER 650 also requires an extra timer if more than one timing cycle is to be...
Surgeflex 32 is a mobile system for testing and fault locating on low and medium voltage cables. The powerful ARM (Arc ReflectionMethod) is used for prelocation of high resistance faults up to 32 kV. Should...
Test and diagnostics system for medium voltage cables
The VLF sine wave 62 kV with integrated tan delta is a compact, robust, and portable high-performance test and diagnostic system for medium voltage cables.
Developed, after extensive customer research, specifically to meet the needs of today’s electrical contractors, the new MIT300 range of insulation and continuity testers from Megger is not only durable and easy to...
The SVERKER750 and SVERKER780 Relay Test Set are the engineer's toolbox. The control panel features a logical layout, SVERKER 650 users will find it comfortably familiar and will be able to start work right away.
This...
Power Diagnostix ICMcompact provides a simple push-button interface and on-screen menus in an embedded LCD panel. The LCD display modes include a simple PD charge meter with adjustable “needle” sensitivity, monochrome...
The new Megger DPM1000 Power Clamp meter combines the functionality of power meter, harmonics meter and data logger in one easy to use package. The design meets the requirements of BSEN 61010-1 CAT IV 600V for supply...
The InsuLogix® G2 provides early detection of faults in power transformers. By detecting and measuring both hydrogen and acetylene, the InsuLogix® G2 is the only monitor that a transformer operator needs to...
MOM2 is designed to measure the resistance of circuit breaker contacts, bus-bar joints and other high-current links. This product is designed with safety, ease of use and versatility in mind.
This item is not...
NetEP is a permanently-installed, fully automated machine system monitoring solution. It continuously acquires health and performance data on electric motors and the rotating machine systems they operate. With the...
The MTO210 transformer ohmmeter is a line-operated, field-portable instrument designed specifically to measure the dc resistance of all types of magnetic windings safely and accurately. It can test transformers and...
The UHF PD Detector is the ideal tool for quick, non-invasive surveys in MV and HV substations and should be part of the toolkit for all maintenance and service teams. Due to its high measurement bandwidth, the UHF...
Discharge testing is the only test method that provides a comprehensive insight into battery capacity, and is therefore an essential part of vigorous battery maintenance programmes.
This item is not available for...
The risk of overheating is becoming more serious due to the fact that today's distribution networks have to carry heavier loads. Checking contact resistances at regular intervals detects faults before they cause...
In many situations, conventional fault location is impossible, for example when the electrical supply cannot be disconnected or the necessary fault location system is temporarily unavailable.
This is where the...
The Megger PVM210 provides the solar / photovoltaic engineer a compact, pocket size instrument that is easy to use.
Single handed operation is possible because the solar detector and meter being housed in one neat...
Offering CAT IV, the MIT515 is the simplest of Megger's new range of small light 5 kV insulation resistance testers for the testing and maintenance of high voltage electrical equipment. Enclosed in a tough case it is...
The TM1800 is the instrument platform for circuit breaker maintenance, based on more than 20 years’ experience of over 4,000 delivered breaker analysers. The modular construction makes it possible to configure the...
Is it possible to know in advance when a power failure will happen?
Can you reduce outage times to a minimum?
And: can you locate cable faults at all without disconnecting the consumer from the mains?
YES, Megger can....
The Megger TC3231 offers a professional infrared 32 x 31 pixels image thermometer with a 2.2 inch (55.88 mm) colour TFT LCD display
Click Here To Watch Video
Test and diagnostics system for medium-voltage cables
The VLF sine 45 kV with integrated tan delta is a compact, robust, and portable high-performance test and diagnostic system for medium voltage cables.
The DET2/3 is a robust and compact automatic earth (ground) test instrument designed to measure earth electrode resistance and soil resistivity. For use on large or more complex earth systems, which include...
The Megger LRCD200 series is the latest generation of combined non-tripping loop tester and RCD test instruments that provide simple, affordable and flexible test tools for electrical contractors testing energised...
The FRAX series of sweep frequency response analyzers (SFRA) detects potential mechanical and electrical problems that other methods are unable to detect.
This item is not available for sale online. Please contact...
Online PD monitoring on rotating machines, transformers, cables, and especially GIS systems. It combines proven technology of the ICMmonitor with new processor technology and embedded hardware capabilities. The...
The Megger VF6 EX Voltage Detector is intended to be used to check for the presence of AC voltage, indicated by a bright red LED situated within the white nylon tip, an audible sounder plus vibration alert. The...
The AVO850 is a professional True-RMS digital multimeter with TFT colour LCD screen 50 000 count display. Includes handy bar graph, capture and Bluetooth feature’s. Designed for precision and convenience, this is a...
Megger’s automatic portable oil test sets perform accurate breakdown voltage tests on mineral, ester and silicon insulating liquids.
This item is not available for sale online. Please contact 62925161 or...
The Baker DX series can apply a wide set of off-line electrical tests to assess the condition of motors and coils.
This item is not available for online purchase. Please contact 62925161 or sales@cetm.com.sg for...
The EZ-RESTORE OVERDRIVE features a 1,100-joule output at 12 kV. A DC output of 12 kV to indicate breakdown voltage is optional with this unit. Possessing a measuring range up to 25,000 feet, the EZ-RESTORE OVERDRIVE...
Centrix 2.0 is the world’s most modern and powerful cable test van system for fast, easy and non-destructive fault location up to 33 kV.
Click Here For Video
This item is not available for online purchase. Please...
The SMART THUMP ST25-30 Portable/Vehicle-mounted Cable Fault Locating System provides safe, efficient and extremely easy-to-use solutions for quickly identifying, prelocating and pinpointing various types of cable...
This versatile instrument can provide test currents from 10 amps up to 200 amps subject to the load resistance and supply voltage. A large LCD displays all all test parameters and measurement results.
This item is...
The MJÖLNER Series is designed to measure the resistance of circuit breaker contacts, bus-bar joints, contact elements in bus-bars and other high-current links.
This item is not available for online purchase. Please...
For customers who need more power and functionality with fault locating, Megger offers the Surgeflex25-1150 M. These systems are designed for the more frequent and experienced users. They offer the benefits of...
The MFT-X1 introduces our first generation of platform based, user upgradeable MFTs, to add to the existing Megger MFT1700 range of multifunction testers. It has been designed and manufactured at our Dover factory in...
The MIT400 mk2 series insulation and continuity testers are designed not just for Electrical and Industrial, but with an exceptionally wide range of applications from electrical installations, cable testing, motor...
These high-current supply units have two main fields of application.
This item is not available for sale online. Please contact +65 6292 5161 or sales@cetm.com.sg for purchase/enquiry.
The Surge Wave Generator SWG 500 operates in the middle voltage range of the usual SWGs. While its surge energy is in the lower range, the three voltage ranges are switchable, which allows each voltage stage to use...
The Megger LRCD200 series is the latest generation of combined non-tripping loop tester and RCD test instruments that provide simple, affordable and flexible test tools for electrical contractors testing energised...
The IMT100 is a versatile hand held multi testing instrument with dedicated four wire insulation resistance, and four wire Kelvin low resistance features ideal for comprehensive industrial applications. The IMT100...
Engineer’s ultimate toolbox that addresses the increasing need for three-phase testing capability in electrical distribution substations, renewable power generation stations and industrial applications.
This item is...
The PAT100 series of hand-held portable appliance testers enable simple, fast safety testing in all environments including offices, shops and business units. It is ideally suited to training organisations, easy to...
The MTO 300 series delivers full eight-terminal/six-winding resistance measurement capability. It is designed to save time for the user by testing all normal 6 windings without having to disconnect and reconnect leads...
With the PD Scan, Megger offers a lightweight, robust and portable PD scanner that can quickly inspect various type of equipment for partial discharge signals.
Click Here For Video
This item is not available for...
The Megger TPT420 voltage tester is designed to provide electricians and electrical engineers with an easy to use voltage indicating instrument. The meter will continue to warn the operator of dangerous test voltages...